HDR – Small Cell
A specially designed industrial-grade Access Point, capable of providing multi-gigabit Wi-Fi transmission at the 60GHz spectrum. It is developed based on the IEEE 802.11ad wireless networking standards, which allows for more bandwidth usage for data transmission at high data rates.
It is delivered at a high data rate of 2.5 Gbps, with throughput of up to 1Gbps at 1km. Enclosed in an IP67-rated casing, it is most suited for outdoor environment applications, while providing a stable and optimal wireless communication.
Tx Basic Information
| Frequency Range | 57GHz~66GHz |
| Channels | 1 to 4 |
| Modulation | MCS1~9 |
| EIRP (Max.) | 43dBm |
| Antenna Gain | 17.2 dBi |
| Beam Angle | H: 120°, V: 20° |
| Throughput | 1~2Gbps |
| Interface | 1 x Micro-B USB 3.0 |
| Power Supply | DC input (5V) |
| Power Consumption | ~3W |
| Operating Temperature | -30°C to 55°C |
| Storage Temperature | -40°C to 70°C |
| Environmental Humidity non-condensing |
Operating: 10% to 90% Storage: 5% to 95% |
Rx Basic Information
| Frequency Range | 100MHz~70GHz |
| Antenna Gain | ~20dBi |
| Power Supply | DC input (5V) |
| Power Consumption | ~0.2W |
| Sensitivity (without Antenna) | -38dBm to 0dBm |
| Operating Temperature | -30°C to 55°C |
| Storage Temperature | -40°C to 70°C |
| Environmental Humidity non-condensing |
Operating: 10% to 90% Storage: 5% to 95% |
Wideband Transceiver Platform
應用場景
- 天線增益與場型量測
- Link Budget預估/通道增益量測
- 波束掃描
- 相位校正
- 波束成型
量測情境1: 天線增益與場型量測
搭配毫米波天線設計，此設備可量測天線場型與增益，並比較量測結果與模擬的差異，分析誤差來源。
量測情境2: Link Budget預估 / 通道增益量測
通信信號鏈路餘量計算方法，可透過此設備了解發射功率、天線增益、通訊距離傳輸損耗、大氣損耗和接收靈敏度等關鍵參數對通信性能的影響。
量測情境3: 波束掃描
可以透過改變饋入每個天線元件的訊號的相位來操縱輻射方向。將有效波束控制在線性陣列的目標方向上。
量測情境4: 相位校正
通過此設備提供調整相位之功能，能根據調整個別相位來做校正 。
量測情境5: 波束成型
此工具附帶的軟體操控介面，能進行毫米波波束形成器的測試與演示，使用者可透過切換相位並使用功率檢測器驗證天線方向圖，從而修改毫米波模塊的場方向圖。
以上模組接可客製化。詳細規格請與我們聯繫
